Sorbent tubes for CDS Dynatherm

Camsco manufactures sorbent tubes, fast flow tubes and focusing traps for use in Dynatherm ACEM 9300, ACEM 900, 9300 TDA, IACEM 980 and A/DAM agent monitor instruments. Dynatherms have been used for many years for both civilian and military applications. Camsco has the in-house capabilities to address several complex Dynatherm tube specific applications from fused glass frits, precision bore, centerless grinding to multiple compound outside diameters, glass blowing, grinding, lapping, annealing and polishing. We have the equipment and expertise to do all this in house others, including Dynatherm, farm it out to 2nd and 3rd parties.

Standard Features

Camsco uses only the best raw materials. Our borosilicate-33 glass tube stock is German Schott-Duran and we never use Simax tubing. All of the sorbent tubes and traps that Camsco makes for the Dynatherms are centerless ground to an exacting OD tolerance of +/-.00225”. We offer the choice of frit sizes, porosities and pressure drop test all tubes to make certain that the frit hasn’t restricted flow during the annealing process which historically has been a problem with other manufacturers. Individual tube conditioning and glass storage vials or caps are optional.

Several Chemical Weapons Depots, both in the US and in Russia prefer sample tubes and focusing traps with captured spacers. When this preferred method is requested we replace the fused glass frits with inert coated 316L stainless steel wire cloth disks on both side of the sorbent bed for better structural integrity and consistent Delta P’s.

COGNI™ System

Barcode, serial number, and circumferential band(s) come standard as part of the COGNI System. The identification marks are permanently embedded on the tubes offering an inherent advantage over other identification methods.

Camsco offers silanized and unsilanized glass and quartz wools, as well as more robust sample tubes and focusing traps with captured spacers on each end.

Capping Options

Both compression and micro caps are available. Please refer to the Capping Options for more information.

If compression caps are ordered with conditioned tubes, Camsco guarantees that each cap is torqued to optimal tightness.

Technical Specifications and Part Numbers

Standard 6mm Dynatherm

	Part Number*
HayeSep® D 40/60 mesh	AC60408-B
Chromosorb® 106 60/80 mesh	AC60403-B
Tenax™ TA 35/60 mesh	AC60420-B
Tenax™ GR 20/35 mesh	AC60420GR-B
Tenax™ TA/HayeSep® D	AC60430-B
Carbosieve™ SIII 60/80 mesh	AC60420-08-B
Carboxen™ 569 20/45 mesh	AC60430-20-B
Tenax™ TA/Carboxen™ 1000	AC60420-1000-B

Fast Flow Tubes for Dynatherm IACEM

	Part Numbers*
HayeSep® D 40/60	AC6-100408-B
Chromosorb™ 106 40/60	AC6-100403-B
Tenax™ TA 35/60	AC6-100420-B
Tenax™ GR 60/80	AC6-100420GR-B
Tenax™ TA 35/60 / HayeSep® D 40/60	AC6-100420-0820-B
Chromosorb™ 106/Tenax™ TA	AC6-100419-B
Chromosorb™ 106 60/80 / HayeSep® D 40/60	AC6-100420-0308-B
Carbotrap™ 317	AC6-1004317-B

6mm Focusing Traps for ACEM (7.25" Length)

	Part Number*
HayeSep® D 40/60	FC60608-B
Chromosorb™ 106 60/80	FC60603-B
Tenax™ TA 60/80	FC60620-B
Tenax™ GR 60/80	FC60620-GR-B
Tenax™ TA 60/80 / HayeSep® D 40/60	FC60608-20-B
Carbotrap™ 201	FC606201-B

6mm Focusing Traps for IACEM 9300 (4.5" Length)

	Part Number*
HayeSep® D 40/60	IFC60608-B
Chromosorb™ 106 60/80	IFC60603-B
Tenax™ TA 60/80	IFC60620-B
Tenax™ GR 60/80	IFC60620GR-B
Tenax™ TA 60/80 / HayeSep® D 60/80	IFC60608-20-B
Carbotrap™ 201	IFC606201-B
Carbotrap™ 300	IFC606300-B
Carbotrap™ 301	IFC606301-B
Carbotrap™ 317	IFC606370-B
*All part numbers correlate to the following options: Conditioned; Brass Compression Caps (Swagelok)

Sorbent Tubes for CDS Dynatherm Instruments